Ask Latest Price
Verified Supplier
1 Years
Guangzhou Zhongli Technology Co., Ltd
Add to Cart
Product Description
| Property | Iron-Based Alloy Powders | Stainless Steel (316L) | Nickel Alloys (Inconel 625) | Titanium (Ti-6Al-4V) |
|---|---|---|---|---|
| Density (g/cm³) | 7.4–7.9 (varies by alloy) | 7.9 | 8.4 | 4.4 |
| Hardness (HRC) | 20–65 (depends on heat treatment) | 25–35 | 20–40 (annealed) | 36–40 |
| Tensile Strength (MPa) | 300–1,500+ | 500–700 | 900–1,200 | 900–1,100 |
| Corrosion Resistance | Moderate (improves with Cr/Ni) | Excellent | Excellent | Excellent |
| Max Operating Temp. (°C) | 500–1,200 (alloy-dependent) | 800 | 1,000+ | 600 |
| Cost (vs. Pure Fe = 1x) | 1x–5x (alloy-dependent) | 3x–5x | 10x–20x | 20x–30x |
Injection molding of powder injection molding technology
Compared with traditional process, with high precision, homogeneity, good performance, low production cost, etc. In recent years, with the rapid development of MIM technology, its products have been widely used in consumer electronics, communications and information engineering, biological medical equipment, automobiles, watch industry, weapons and aerospace and other industrial fields.
| Grade | Chemical Nominal Composition(wt%) | |||||||||
| Alloy | C | Si | Cr | Ni | Mn | Mo | Cu | W | V | Fe |
| 316L |
|
| 16.0-18.0 | 10.0-14.0 |
| 2.0-3.0 | - | - | - | Bal. |
| 304L |
|
| 18.0-20.0 | 8.0-12.0 |
| - | - | - | - | Bal. |
| 310S |
|
| 24.0-26.0 | 19.0-22.0 |
| - | - | - | - | Bal. |
| 17-4PH |
|
| 15.0-17.5 | 3.0~5.0 |
| - | 3.00-5.00 | - | - | Bal. |
| 15-5PH |
|
| 14.0-15.5 | 3.5~5.5 |
| - | 2.5~4.5 | - | - | Bal. |
| 4340 | 0.38-0.43 | 0.15-0.35 | 0.7-0.9 | 1.65-2.00 | 0.6-0.8 | 0.2-0.3 | - | - | - | Bal. |
| S136 | 0.20-0.45 | 0.8-1.0 | 12.0-14.0 | - |
| - | - | - | 0.15-0.40 | Bal. |
| D2 | 1.40-1.60 |
| 11.0-13.0 | - |
| 0.8-1.2 | - | - | 0.2-0.5 | Bal. |
| H11 | 0.32-0.45 | 0.6-1 | 4.7-5.2 | - | 0.2-0.5 | 0.8-1.2 | - | - | 0.2-0.6 | Bal. |
| H13 | 0.32-0.45 | 0.8-1.2 | 4.75-5.5 | - | 0.2-0.5 | 1.1-1.5 | - | - | 0.8-1.2 | Bal. |
| M2 | 0.78-0.88 | 0.2-0.45 | 3.75-4.5 | - | 0.15-0.4 | 4.5-5.5 | - | 5.5-6.75 | 1.75-2.2 | Bal. |
| M4 | 1.25-1.40 | 0.2-0.45 | 3.75-4.5 | - | 0.15-0.4 | 4.5-5.5 | - | 5.25-6.5 | 3.75-4.5 | Bal. |
| T15 | 1.4-1.6 | 0.15-0.4 | 3.75-5.0 | - | 0.15-0.4 | - | - | 11.75-13 | 4.5-5.25 | Bal. |
| 30CrMnSiA | 0.28-0.34 | 0.9-1.2 | 0.8-1.1 | - | 0.8-1.1 | - | - | - | - | Bal. |
| SAE-1524 | 0.18-0.25 | - | - | - | 1.30-1.65 | - | - | - | - | Bal. |
| 4605 | 0.4-0.6 |
| - | 1.5-2.5 | - | 0.2-0.5 | - | - | - | Bal. |
| 8620 | 0.18-0.23 | 0.15-0.35 | 0.4-0.6 | 0.4-0.7 | 0.7-0.9 | 0.15-0.25 | - | - | - | Bal. |
Powder specification:
| Particle Size | Tapping Density | Particle Size Distribution(μm) | ||
|
| (g/cm³) | D10 | D50 | D90 |
| D50:12um | ＞4.8 | 3.6- 5.0 | 11.5-13.5 | 22-26 |
| D50:11um | ＞4.8 | 3.0- 4.5 | 10.5-11.5 | 19-23 |
Exhibition & Partner
Case
Ship to Poland
Ship to Germany
FAQ
Common grades include 316L (excellent corrosion resistance), 17-4 PH (high strength and hardness), 304L (general-purpose use), and 420 (wear resistance). Each grade has specific properties suited for different applications.
The particle size typically ranges from 15 to 45 micrometers (µm). Spherical particles are preferred for better flowability and packing density.
Yes, unused powder can often be recycled by sieving and blending with fresh powder. However, excessive reuse can degrade powder quality, so regular testing is recommended.
Avoid inhalation or skin contact by using gloves, masks, and protective clothing.
Store powders in a dry, airtight container to prevent moisture absorption.
Handle powders in a well-ventilated area or under inert gas to minimize explosion risks.